HL-1470N
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/hl1470n_all.jpg)
HL-1470N
Date: 27/01/2014 ID: faq00000208_017
How do I clean the corona wire of the drum unit?
If you are experiencing print quality problems, please clean the corona wire as follows:
Do NOT use flammable substances or any type of spray to clean the inside or outside of the machine. Doing this may cause a fire or electrical shock.
![](/g/b/img/faqend/faq00000208_017/au/en/8152/spray.gif)
-
Unplug the printer.
-
Take the drum unit out of the printer.
We recommend that you place the Drum unit assembly on a piece of disposable paper or cloth in case you accidentally spill or scatter toner.
- Carefully turn the drum unit upside down.
-
Clean the primary corona wire inside the drum unit by gently sliding the tab from right to left several times.
-
Return the tab to Home position before reinstalling the drum unit.
Be sure to return the tab to the Home position, or printed pages may have vertical stripes.
- Re-install the drum unit into the printer.
-
Close the front cover.
- Plug in the power cord.
HL-1230, HL-1240, HL-1250, HL-1270N, HL-1430, HL-1440, HL-1450, HL-1470N
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.