FAQ & Fehlerbehebung

Schließen

ADS-2700W

FAQ & Fehlerbehebung

FAQ & Fehlerbehebung

ADS-2700W

Nicht Ihr Produkt?

Datum: 25.01.2018 Kennnummer: faq00002076_004

I am using Scan to Email (E-mail server) function to send a scanned document directly to an E-mail address.
Since our provider requires an authentication for the SMTP server, I am not able to use this function anymore.

Follow the steps listed below:

NOTE: The screens may differ depending on operating system being used and your Brother machine.

 

  1. To use Web Based Management, type http://IP address on the machine/ into your web browser.
  2. Enter a password if you have set one and press the Right arrow key.
  3. Click the Network tab at the top of the page.
  4. In the Network page, click Protocol.
  5. Click Advanced Setting of POP3/SMTP, POP3/SMTP or SMTP and make sure that the status of POP3/SMTP, POP3/SMTP or SMTP is Enabled.
  6. Configure and change the following settings.

     

    1. To correspond to OP25B, enter 587. Default is 25.
    2. Choose the authentication method specified by your provider.
      For example: SMTP-AUTH
    3. Input your account name for the SMTP server.
      For example: brother_ifax
    4. Input your password for the SMTP server.
  7. Click Submit.

If the error still occurs, change the value of Gateway Timeout as below.

 

  1. Click Network at the top of the page.
  2. In the Network page, click Wired (or Wireless) => Advanced Settings.
  3. Change the value of the Gateway Timeout to 60.
  4. Click Submit.

Relevante FAQ

Relevante Modelle

ADS-2600W, ADS-2600We, ADS-2700W, ADS-2800W, ADS-3600W, DCP-8250DN, DCP-9270CDN, DCP-L5500DN, DCP-L6600DW, DCP-L8410CDW, MFC-5890CN, MFC-6490CW, MFC-6890CDW, MFC-8510DN, MFC-8520DN, MFC-8880DN, MFC-8890DW, MFC-8950DW, MFC-8950DWT, MFC-9120CN, MFC-9140CDN, MFC-9142CDN, MFC-9320CW, MFC-9330CDW, MFC-9332CDW, MFC-9340CDW, MFC-9342CDW, MFC-9460CDN, MFC-9465CDN, MFC-9840CDW, MFC-9970CDW, MFC-J5910DW, MFC-J6510DW, MFC-J6710DW, MFC-J6910DW, MFC-L5700DN, MFC-L5750DW, MFC-L6800DW(T), MFC-L6900DW(T), MFC-L8650CDW, MFC-L8690CDW, MFC-L8850CDW, MFC-L8900CDW, MFC-L9550CDW(T), MFC-L9570CDW(T)

Wenn Sie weitere Unterstützung benötigen, wenden Sie sich an den Brother-Kundendienst:

Rückmeldung zum Inhalt

Helfen Sie uns dabei, unseren Support zu verbessern und geben Sie uns unten Ihre Rückmeldung.
Schritt 1: Wie hilfreich sind für Sie die Informationen auf dieser Seite?
Schritt 2: Möchten Sie noch ein paar Bemerkungen hinzufügen?

Bitte beachten Sie, dass dieses Formular nur für Rückmeldungen verwendet wird.

Senden