HL-T4000DW
 |
FAQs & Troubleshooting |
HL-T4000DW
Date: 29/11/2021 ID: faq00002411_032
Cover is Open
The following covers may not be completely closed. Check if the following covers are completely closed.
The top cover or scanner cover is not locked in the closed position.
- Lift the top cover or scanner cover and then close it again.
- Make sure the telephone line cord and/or interface cable (if used) have been guided correctly through the cable channel and out the back of the machine.
The ink cartridge cover or ink tank cover is not locked in the closed position.
- Firmly close the ink cartridge cover or ink tank cover until it locks into place.
DCP-J1050DW, DCP-J1140DW, DCP-J1700DW, HL-T4000DW, MFC-J1010DW, MFC-J2340DW, MFC-J2740DW, MFC-J3540DW, MFC-J3940DW, MFC-J4340DW(XL), MFC-J4440DW, MFC-J4540DW(XL), MFC-J5340DW, MFC-J5740DW, MFC-J5855DW(XL), MFC-J5955DW, MFC-J6540DW, MFC-J6555DW(XL), MFC-J6740DW, MFC-J6940DW, MFC-J6955DW, MFC-J6957DW, MFC-T920DW, MFC-T925DW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.