HL-5380DN
 |
FAQs & Troubleshooting |
HL-5380DN
Date: 17/01/2014 ID: faq00000095_010
How do I install the Optional Tray Unit?
-
Turn off the printer power switch, and remove all the cables from the machine.
-
Lift the printer carefully with both hands and place it onto the lower tray unit, so that the alignment pins of the lower tray unit are inserted into the guide holes on the bottom of the printer. If you want to install two lower tray units, first combine both optional tray units, and then place the printer onto the lower tray unit.
-
Remove the paper tray from the lowest optional unit, and swap it with the tray already fitted in your machine. Failure to swap the paper trays will cause paper jams in the lower tray option. Reconnect all cables and switch on the printer.
-
Set the paper size on the control panel of your machine; see the User's Guide.
For Windows Users go to Start > Settings > Control Panel > Printers (Printers and Faxes for Windows XP users).
Right-click on your printer icon and choose Properties.
Choose the Accessories tab and click Auto Detect, once the lower trays and paper size have been detected then click Apply.
(Under certain conditions Auto Detect may not be available. If this situation occurs, you can manually add the options you have installed. In Available Options select the option you have installed, click Add and then Apply.)
HL-5270DN, HL-5380DN
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.