CV3550
 |
FAQs & Troubleshooting |
CV3550
Date: 30/01/2018 ID: faqh00100951_000
The different type of the top cover stitches and a general guideline for thread tension settings.
Triple top cover stitch
The thread tension dial settings listed below are based on a stitch length of 3 and a differential feed ratio of 1.0.
Since the settings may differ depending on the types of fabric and thread used, be sure to check the thread tension.
| Type of stitch | Number of needles | Number of threads | Thread tension dial | Stitch | ||||
|---|---|---|---|---|---|---|---|---|
| Left needle | Center needle | Right needle | Top cover thread | Looper thread | ||||
| Triple top cover stitch | 3 | 5 | 3 - 5 | 3 - 5 | 3 - 5 | 3 - 5 | 3 - 5 |  |
 |
Stitching direction |
Balanced tension The top cover thread sews a straight seam on the surface of the fabric, and the looper thread forms loops on the back. |
|---|---|---|
 |
Top cover thread is too loose. Turn the top cover thread tension dial to a higher number to increase the tension, or turn the needle thread tension dial to a lower number to reduce the tension. |
|
 |
Top cover thread is too tight. Turn the top cover thread tension dial to a lower number to decrease the tension, or turn the needle thread tension dial to a higher number to increase the tension. |
Top cover stitch (Wide/Narrow)
The thread tension dial settings listed below are based on a stitch length of 3 and a differential feed ratio of 1.0.
Since the settings may differ depending on the types of fabric and thread used, be sure to check the thread tension.
| Type of stitch | Number of needles | Number of threads | Thread tension dial | Stitch | ||||
|---|---|---|---|---|---|---|---|---|
| Left needle | Center needle | Right needle | Top cover thread | Looper thread | ||||
| Top cover stitch (Wide) | 2 | 4 | 3 - 5 | - | 3 - 5 | 3 - 5 | 3 - 5 |  |
| Top cover stitch (Narrow) | 2 | 4 | - | 3 - 5 | 3 - 5 | 3 - 5 | 3 - 5 |  |
 |
Stitching direction |
Balanced tension The top cover thread sews a straight seam on the surface of the fabric, and the looper thread forms loops on the back. |
|---|---|---|
 |
Top cover thread is too loose. Turn the top cover thread tension dial to a higher number to increase the tension, or turn the needle thread tension dial to a lower number to reduce the tension. |
|
 |
Top cover thread is too tight. Turn the top cover thread tension dial to a lower number to decrease the tension, or turn the needle thread tension dial to a higher number to increase the tension. |
CV3550
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.