PT-E300
FAQs & Troubleshooting |
PT-E300
Date: 16/03/2020 ID: faqp00001475_006
How do I set cut options and what features are they?
-
Press the Style key to display the Label menu.
-
Select "Cut Option" using the Up or Down arrow key, and then set the value by using the Left or Right arrow key.
-
Press the OK or Enter key to apply the settings.
* New settings are NOT applied if you do not press the OK or Enter key.
Large Margin
- Each label is printed, leaving a margin of 24 mm/0.94" on each end.
Small Margin
- A margin of 23 mm/0.91" is fed before printing each label. The printed label has a margin of 4 mm/0.16" before and after the text.
Chain
- Use this setting when printing several labels with minimum margins.
- A margin of 23 mm/0.91" is printed first, and then each label is printed, leaving a margin of 4 mm/0.16" before and after the text.
No Cut
- Use this setting when printing Heat Shrink Tube.
- Pressing the Shift key and then the Preview key feeds the last printed label and cut it.
PT-E300
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.