TJ-4020TN
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/lptj4020tneas.jpg)
TJ-4020TN
Date: 24/06/2020 ID: faqp00100473_001
The printed label is wrinkled.
Check the following:
Are the ribbon and media loaded correctly?
If not, reload them correctly. For details, see the FAQ: "How to load the Ribbon" or "How to load the Media".
Is the print density correct?
If not, set the suitable density to have good print quality.
Follow the steps below:
- Connect your computer and the printer, and then make sure that the printer is turned on.
- Start the BPM (Brother Printer Management Tool), and then click the Printer Configuration button.
- Check the Density setting in the FBPL tab.
Is the media fed correctly?
Make sure the Media Guide Tips fit the label width.
Is the Print Head tension adjusted correctly?
For the best print quality, adjust the Print Head tension using the Print Head Tension Adjustment Knob. Choose one of six levels of tension adjustment depending on the media width you use (1″ - 2″ (25.4 mm - 50.8 mm) or 3″ - 4″ (76.2 mm - 101.6 mm)).
![Adjust the Print Head tension Adjust the Print Head tension](/g/b/img/faqend/faqp00100473_001/as_ot/en/2387517/g_027.gif)
The recommended Print Head tension values are:
1. For 1″ - 2″ (25.4 mm - 50.8 mm) media width
2. For 3″ - 4″ (76.2 mm - 101.6 mm) media width
Is the ribbon tension adjusted correctly?
To avoid wrinkled labels, adjust the ribbon tension using the Ribbon Tension Adjustment Screw. Choose one of five levels of tension adjustment.
![Adjust the ribbon tension Adjust the ribbon tension](/g/b/img/faqend/faqp00100473_001/as_ot/en/2387518/g_028.gif)
1. Ribbon Tension Adjustment Screw
TJ-4020TN, TJ-4120TN
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.