PT-P710BT
FAQs & Troubleshooting |
PT-P710BT
Date: 26/10/2023 ID: faqp00001491_010
How to change the rechargeable Li-ion battery
To change the rechargeable Li-ion battery, remove and reinsert the battery according to the following steps below.
- Turn off the printer and disconnect the USB cable.
- Open the cassette cover and remove the tape cassette.
-
Remove the two screws from the Battery Cover using a flat-blade screwdriver.
* Battery Cover -
Remove the battery.
Dispose of batteries at an appropriate collection point. Be sure to observe all applicable local regulations. When storing or discarding a battery, wrap it with cellophane tape to prevent it from short-circuiting.
Do not dispose the battery with household waste. There is a risk of environmental damage, explosion, or fire.
-
When reinserting the battery, make sure that the battery's contacts are touching the contacts inside the battery compartment.
- Replace the Battery Cover, reinsert the screws, and tighten them with a flat-blade screwdriver.
- Close the Cassette Cover.
PT-P710BT
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.