Innov-is NV880E
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/hf_inovnv880eeas.jpg)
Innov-is NV880E
Date: 12/11/2015 ID: faqh00000639_001
How do I attach or remove the embroidery frame ?
Wind and insert the bobbin before attaching the embroidery frame.
Attaching the Embroidery Frame
-
Press the
(Presser Foot Lifter button) to raise the presser foot.
-
Raise the frame-securing lever.
(1) Frame-securing lever (2) Carriage
-
Align the embroidery frame guide with the right edge of the embroidery frame holder.
(1) Embroidery frame holder (2) Embroidery frame guide
-
Slide the embroidery frame into the holder, making sure to align the embroidery frame’s arrow mark with the one on holder.
(1) Arrow mark -
Lower the frame-securing lever to be level with the frame to secure the embroidery frame in the embroidery frame holder.
If the frame-securing lever is not lowered, the following message appears.
You cannot start sewing until you lower the frame-securing lever.
Removing the Embroidery Frame
-
Press the
(Presser Foot Lifter button) to raise the presser foot.
-
Raise the frame-securing lever.
-
Pull the embroidery frame toward you.
Related FAQs
Innov-is NQ3500D, Innov-is NQ3700D, Innov-is NV2600, Innov-is NV2700, Innov-is NV800E, Innov-is NV880E
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.