FAQs & Troubleshooting

Close

Innov-is XP3

FAQs & Troubleshooting

FAQs & Troubleshooting

Innov-is XP3

Not your product?

Date: 09/08/2018 ID: faqh00000636_002

How do I attach the Embroidery foot "W"?

  • When attaching an embroidery foot, always press  on the screen. You may accidentally press the Start/Stop button and possibly cause injury.
  • Be sure to use embroidery foot W when doing embroidery. Using another embroidery foot may cause the needle to strike the embroidery foot, causing the needle to bend or break and possibly cause injury.

 

 

  1. Press the Needle Position button to raise the needle.



     

     
  2. Press  to lock all keys and buttons.
    * If the message OK to automatically lower the presser foot? appears on the LCD screen, press OK to continue.




     
  3. Raise the presser foot lever.




     
  4. Press the black button on the presser foot holder and remove the presser foot.
    (1) Black button
    (2) Presser foot holder

     


 

 

  1. Loosen the screw of the presser foot holder to remove the presser foot holder.
    (1) Multi-purpose screwdriver
    (2) Presser foot holder screw
    (3) Presser foot holder



     
  2. Position the embroidery foot W on the presser foot bar by aligning the notch of the presser foot to the large screw.

    Side view



     

  3. Hold the embroidery foot in place with your right hand, and then use the included multi-purpose screwdriver to securely tighten the presser foot holder screw.
    (1) Presser foot holder screw
     

    Use the included multi-purpose screwdriver to firmly tighten the screw of the presser foot holder. If the screw is loose, the needle may strike the embroidery foot and possibly cause injury.




     
  4. Press  to unlock all keys and buttons.
    >> All keys and operation buttons are unlocked, and the previous screen is displayed.

 

Related Models

Innov-is XP1, Innov-is XP2, Innov-is XP3

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.