Innov-is 6750D
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/hf_inov6750deas.jpg)
Innov-is 6750D
Date: 14/05/2015 ID: faqh00000566_000
How do I place edge sewing sheet?
Before placing edge sewing sheet, set full-winded bobbin in the bobbin case. If you need to change the bobbin while edge sewing, remove the Edge sewing sheet carefully and place it again after changing the bobbin.
1. | Peel off the Transparent sheet of the Edge sewing sheet. |
![]() |
|
|
|
To keep the edge sewing sheet from wrinkling, hold tab and peel from the bottom. Wrinkled edge sewing sheet cannot be used. Use new edge sewing sheet. |
|
2. | Place the Edge sewing sheet on top of the needle plate cover. |
Align the guides on the Edge sewing sheet with the sides of the needle plate cover, and then adjust the position of the Edge sewing sheet so that its cutout aligns with the edges of the opening for the feed dogs. Position the Edge sewing sheet so that there is no gap between it and the edges of the opening for the feed dogs. |
|
![]() |
|
![]() ![]() ![]() |
|
|
If the metal needle plate is visible between the feed dogs and the Edge sewing sheet, the fabric may be incorrectly detected by the built-in camera.
When edge sewing is finished, store the edge sewing sheet affixed to the transparent sheet in order to prevent it from collecting dust.
The edge sewing sheet with dust or little piece of thread on the sticky side cannot be used due to low adhesion
Transparent sheet
Edge sewing sheet
Innov-is 6700D, Innov-is 6750D, Innov-is I / Innov-is 6000D, Innov-is Ie
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.