Innov-is A80
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/hf_inova80eas.jpg)
Innov-is A80
Date: 18/07/2018 ID: faqh00000403_001
"E8" message appears on the LCD.
Cause
This message is displayed when (Twin needle) is turned on, and a stitch pattern that cannot be sewn with the twin needle is selected.
Solution
-
When you want to sew a pattern you selected :
Switch to the single needle mode, and replace the twin needle with a single needle before continuing the operation.
To switch to the needle mode, press
(the needle mode selection key ).
The twin needle mode indicator changes to the single needle mode.
-
When you want to sew with the twin needle :
Select a pattern that can be sewn with the twin needle.
Refer to Stitch Chart on the operation manual to learn stitches that can be sewn with a twin needle.
Innov-is A50, Innov-is A80, Innov-is A80N, Innov-is C50PK, Innov-is NV50S, TY600C
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.