MFC-L2770DW
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/mfcl2770dw_as.jpg)
MFC-L2770DW
Date: 31/01/2022 ID: faq00100207_509
Load and Print Labels Using the MP Tray
When the back cover (face up output tray) is pulled down, the machine has a straight paper path from the MP tray through to the back of the machine. Use this paper feed and output method when you print on labels.
When you load a different size and type of paper in the tray, you must also change the Paper Size and Paper Type settings in the machine, or on your computer.
- Open the machine's back cover (the face up output tray).
- On the front of the machine, open the MP tray and lower it gently.
When using paper smaller than A6/A5 (Long Edge), you can skip the next step.
- Pull out the MP tray support (1).
When using Legal or Folio size paper, pull out the paper support (1).
- Slide the MP tray paper guides to fit the width of the paper you are using.
- Load paper with the printing surface face up in the MP tray.
- Make sure the paper is below the maximum paper mark (1).
- Change your print preferences in the Print screen before sending the print job from your computer.
- Send your print job to the machine.
- Close the back cover (the face up output tray) until it locks in the closed position.
Related FAQs
MFC-L2770DW, MFC-L2771DW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.