MFC-1911W
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/mfc1911w_as.jpg)
MFC-1911W
Date: 25/09/2014 ID: faq00003168_006
Unpack your Brother machine
Follow the steps below to unpack the machine:
NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.
-
Open the box.
-
Remove the Quick Setup Guide, which contains initial installation instructions for your Brother machine.
-
Remove the starter toner cartridge.
-
Remove the machine part required for A5 size printing.
-
Remove packing foam.
-
Lift the machine out of the box.
-
Remove the plastic bag.
-
Remove all blue protective tape.
-
Open the scanner cover and remove the transparent sheet.
-
Close the scanner cover.
-
Open the top cover.
Do not touch the red colored parts to avoid print quality issues.
-
Remove the drum unit.
-
Unpack the toner cartridge.
-
Remove the protective cover.
-
Put the toner cartridge firmly into the drum unit until you hear it lock into place.
-
Install the toner cartridge and drum unit assembly in the machine.
-
Close the top cover.
After pulling the pull-arm (1) on the left side of the machine down, close the scanner cover using both hands.
- For DCP Users: Go to STEP 21.
-
(Only for MFC models)
Locate the LINE jack on the back of the machine.
-
(Only for MFC models)
Plug the telephone line cord into the LINE jack.
-
(Only for MFC models)
Plug the other end of the telephone line cord into a modular wall jack (socket).
-
Plug the power cord into a standard AC power outlet (electrical socket).
-
(For MFC models)
Press the(On/Off) button to turn on the machine.
(For DCP models)
Press the(On/Off) button to turn on the machine.
Related FAQs
DCP-1610W, DCP-1615NW, DCP-1616NW, MFC-1910W, MFC-1911NW, MFC-1911W, MFC-1915W, MFC-1916NW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.