MFC-L2720DW
FAQs & Troubleshooting |
MFC-L2720DW
Date: 11/05/2015 ID: faq00002647_003
When I send a fax from the machine, an error "not register." or "not registered." is displayed.
The Fax to server may be On and this may cause the issue.
To resolve the issue make sure that Fax to server is Off. There are two ways to change the settings of Fax to server: by using the control panel and by using the Web Based Management.
Choose the appropriate way and follow the steps below.
Method 1: Using the control panel
-
Press (Settings) > All Settings > Network > Fax to Server.
-
Press On.
-
Press Prefix.
-
Enter the prefix (up to 40 characters) using the keyboard on the LCD, and then press OK.
-
Press Suffix.
-
Enter the suffix (up to 40 characters) using the keyboard on the LCD, and then press OK.
- Press (Home).
Method 2: Using the Web Based Management
-
Start your web browser.
-
Type "http://machine's IP address/" into your browser's address bar (where "machine's IP address" is your machine's IP address).
For example: http://192.168.1.2/
-
Click Fax and Fax to Server.
-
Choose Off.
- Click Submit.
MFC-L2720DW, MFC-L2740DW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.