MFC-J6940DW
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/mfcj6940dw_us_eu_as.jpg)
MFC-J6940DW
Date: 28/06/2022 ID: faq00002541_539
Clean the Paper Pick-up Rollers for Paper Tray #1
Cleaning the paper pick-up rollers periodically may prevent paper jams by ensuring that paper feeds correctly.
![image](/g/b/img/faqend/faq00002541_539/as_ot/en/2496829/topic1_icon5.png)
(For some countries) A Cleaning Kit for Paper Pick-up Rollers is supplied with your machine. Clean the paper pick-up rollers using the kit. For more information, see the instructions provided with the cleaning kit.
- Unplug the machine from the electrical socket.
- If the paper support flap is open, close it, and then close the paper support.
- Pull the paper tray (1) completely out of the machine as shown by the arrow.
- Lift the paper support (1), and then pull it at an angle completely out of the machine as shown by the arrow.
- Clean the Paper Pick-up Rollers (1) with a soft lint-free cloth moistened with water. Slowly turn the rollers so that the whole surface is cleaned. After cleaning, wipe the rollers with a dry, soft lint-free cloth to remove all moisture.
- Place the paper support firmly back in the machine. Make sure you fit the paper support into the channels.
- Slowly push the paper tray completely into the machine.
- Reconnect the power cord.
MFC-J3540DW, MFC-J3940DW, MFC-J6540DW, MFC-J6555DW(XL), MFC-J6740DW, MFC-J6940DW, MFC-J6955DW, MFC-J6957DW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.