MFC-7860DN
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/mfc7860dn_as_cn_2.jpg)
MFC-7860DN
Date: 09/07/2015 ID: faq00000105_024
Reset the network settings to the factory default
You can reset the print server back to its default factory settings (resetting all information such as the password and IP address information) using the control panel as follows.
This function resets all wired and wireless network settings to the factory default.
Video Instructions
Control panel Model
* This video is being streamed from YouTube and will open in a new window.
This step can see with text.
Touchscreen Model
* This video is being streamed from YouTube and will open in a new window.
This step can see with text.
- Make sure the machine is not operating, then disconnect all the cables from the machine (except the power cord).
- Press Menu.
- Press the Up or Down Arrow key to choose Network. Press OK.
- Press the Up or Down Arrow key to choose Network Reset. Press OK.
- Press 1 to choose Reset.
- Press 1 to choose Yes for reboot.
- The machine will re-start, re-connect cables once this is complete.
- Make sure the machine is not operating, then disconnect all the cables from the machine (except the power cord).
- Press MENU on the LCD screen.
- Press Network.
- Press the Up or Down Arrow key to display Network Reset and then press Network Reset.
- Press Yes.
- Press Yes for 2 seconds to confirm.
- The machine will re-start, re-connect cables once this is complete.
DCP-8155DN, DCP-9010CN, DCP-9055CDN, MFC-7360N, MFC-7362N, MFC-7460DN, MFC-7860DN, MFC-7860DW, MFC-8510DN, MFC-8910DW, MFC-8950DW, MFC-9010CN, MFC-9120CN, MFC-9125CN, MFC-9320CW, MFC-9325CW, MFC-9460CDN, MFC-9970CDW
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.