FAQs & Troubleshooting

Close

PJ-622

FAQs & Troubleshooting

FAQs & Troubleshooting

Date: 20/11/2017 ID: faqp00001491_001

How to charge the rechargeable Li-ion battery

The rechargeable Li-ion battery can be charged while it is inserted in the printer and also while it is removed from the printer. Perform the following procedure to charge the rechargeable Li-ion battery.

  • Charge the rechargeable Li-ion battery immediately after purchase using the following procedure.
  • Up to 180 minutes is needed to fully charge a rechargeable Li-ion battery. About 300 pages can be printed when using a new, fully-charged rechargeable Li-ion battery.

 

Charging while installed in the printer

 

  1. Make sure that the printer is turned off.
     
  2. Make sure that the rechargeable Li-ion battery is installed in the printer.
    Li-ion battery
  3. Use the AC adapter and AC power cord to connect the rechargeable Li-ion battery to an AC power outlet, or use the DC cable to connect the battery to a DC power outlet.

    The battery indicator lights in orange.

    When the rechargeable Li-ion battery is fully charged, the battery indicator turns off.
    Li-ion battery 1 POWER indicator
    2 (Li-ion) battery indicator

 

Charging while removed from the printer

 

Use the AC adapter and AC power cord to connect the rechargeable Li-ion battery to an AC power outlet, or use the DC cable to connect the battery to a DC power outlet.

The battery indicator lights in orange.

When the rechargeable Li-ion battery is fully charged, the battery indicator turns off.

Battery indicator 1 (Li-ion) battery indicator

 

Stopping rechargeable Li-ion battery charging

 

To stop rechargeable Li-ion battery charging, disconnect the AC power cord or DC cable from the battery's AC/DC connector.

Related FAQs

Related Models

PJ-622, PJ-623, PJ-662, PJ-663

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.