I am having trouble printing with Novell® NetWare®. What should I do?
If you cannot print from NetWare® and you have checked the hardware and network, first verify that the Brother print server is attached to the server queue by going to PCONSOLE, selecting PRINT QUEUE INFORMATION, and then CURRENTLY ATTACHED SERVERS. If the print server does not appear in the list of attached servers, then check the following:
Turning off the printer and then on again to force to rescan the NetWare® queue.
Deleting and recreating the print server and creating a new print queue in order to eliminate the possibility of setup errors.
If you changed the login password, you must change the password in both the Brother print server (using the SET NETWARE PASSWORD command if you are using the BRConfig software) or by using a web browser or the BRAdmin application and in the file server (using the PCONSOLE Print Server Information Change Password command).
If you created the print queue using PCONSOLE and instead of BRAdmin, make sure that you have enabled at least one NetWare® file server using the SET NETWARE SERVER servername ENABLED command.
Have you exceeded your NetWare® user limit?
Make sure that the print server name you used in PCONSOLE exactly matches the name that is configured in the print server, and make sure it is defined as a Queue Server for the print queue.
If you are running both 802.3 and Ethernet II frames on different file servers on your network, there is a possibility that the print server may not make a connection to the desired file server. Try forcing the frame type to the desired one using the SET NETWARE FRAME command from the print server remote console or using BRAdmin.
If you are using DOS CAPTURE statement and losing portions of your print job, try setting the TIMEOUT parameter in your CAPTURE statement to a higher value (at least 50 seconds for Windows®).
If you need further assistance, please contact Brother customer service:
Please note this form is used for feedback only.