MFC-L2750DW

FAQs & Troubleshooting

MFC-L2750DW

Date: 31/01/2022 ID: faq00100494_500

Call your Brother machine from any touch-tone telephone or fax machine to forward incoming faxes to another machine.

You must turn on Fax Storage to use this feature.

Dial your fax number.
When your machine answers, enter your Remote Access Code (three digits followed by *). If you hear one long beep, you have messages.
When you hear two short beeps, press 9 6 2.
Wait for the long beep, and then use the dial pad to enter the number of the remote fax machine where you want your fax messages sent, followed by # # (up to 20 digits).

You cannot use * and # as dial numbers. However, press # if you want to create a pause.
Hang up after you hear your machine beep. Your machine will call the other fax machine, which will then print your fax messages.

MFC-L2715DW, MFC-L2750DW

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Very helpful

Helpful

Not helpful

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.