HL-1430
 |
FAQs & Troubleshooting |
HL-1430
Date: 28/01/2019 ID: faq00100559_000
I'm using openSUSE11.3. I cannot print to my Brother Machine. (Linux)
> Click here to download the tool.
Extract the downloaded file:
Command: gunzip brother_patch_psconv.gz
Run the patch_file.
Command: bash brother_patch_psconv
Manually modify:
Type the following command and look for the file which starts with "psconvert".
Command: ls /usr/local/Brother/lpd/psconvert*
Command: ls /usr/local/Brother/Printer/*/lpd/psconvert*
Command: ls /opt/brother/Printers/*/lpd/psconvert*
Open the found file using a text editor.
Look for the line starting with "GHOST_OPT=".
Insert "-sstdout=%stderr" before "-sOutputFile" in that line.
Example:
Before:
GHOST_OPT="-q -dNOPROMPT -dNOPAUSE -dSAFER -sDEVICE=$OUTPUT_TYPE -sOutputFile=- - -c quit"
After:
GHOST_OPT="-q -dNOPROMPT -dNOPAUSE -dSAFER -sDEVICE=$OUTPUT_TYPE -sstdout=%stderr -sOutputFile=- - -c quit"
DCP-7010, DCP-7030, DCP-7040, DCP-7055, DCP-7065DN, DCP-8020, DCP-8040, DCP-8045D, DCP-8060, DCP-8065DN, DCP-8070D, DCP-8085DN, DCP-8110D, DCP-8110DN, DCP-8155DN, FAX-2820, FAX-2840, FAX-2850, FAX-2920, FAX-2950, HL-1230, HL-1240, HL-1250, HL-1270N, HL-1430, HL-1440, HL-1450, HL-1470N, HL-1650, HL-1670N, HL-1850, HL-1870N, HL-2030, HL-2040, HL-2070N, HL-2130, HL-2140, HL-2150N, HL-2170W, HL-2240D, HL-2250DN, HL-2270DW, HL-2460, HL-2600CN, HL-2700CN, HL-3260N, HL-3450CN, HL-5040, HL-5050, HL-5070N, HL-5140, HL-5150D, HL-5170DN, HL-5240, HL-5250DN, HL-5270DN, HL-5340D, HL-5350DN, HL-5370DW, HL-5380DN, HL-5440D, HL-5450DN, HL-5470DW, HL-6050D, HL-6050DN, HL-6180DW, HL-7050N, HL-8050N, MFC-4800, MFC-7220, MFC-7340, MFC-7360, MFC-7420, MFC-7440N, MFC-7450, MFC-7470D, MFC-7820N, MFC-7840N, MFC-7840W, MFC-7860DW, MFC-8220, MFC-8370DN, MFC-8380DN, MFC-8440, MFC-8460N, MFC-8480DN, MFC-8510DN, MFC-8820D, MFC-8840D, MFC-8840DN, MFC-8860DN, MFC-8880DN, MFC-8890DW, MFC-8910DW, MFC-9160, MFC-9180, MFC-9660, MFC-9880
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.