PJ-773
FAQs & Troubleshooting |
PJ-773
Date: 29/01/2019 ID: faqp00001466_032
What do the indicator lights mean?
The indicators light and flash to indicate the printer’s status. Each indicator may light or flash in green, red, orange or blue.
The symbols used in this FAQ explain the meaning of the different indicator colors and patterns:
or or or | Indicator is lit in the color shown |
or or or | Indicator is flashing in the color shown |
Indicator is lit or flashing in any color | |
Indicator is off |
POWER | DATA | STATUS | (Wi-Fi®) |
Description | Solution |
Battery charging completed with the AC adapter or car adapter connected | |||||
Battery charging | |||||
Rechargeable Li-ion battery in use, battery charge is full | |||||
(Once every four seconds) |
Rechargeable Li-ion battery in use, battery charge is half-full | ||||
(Twice every four seconds) |
Rechargeable Li-ion battery in use, battery charge is low | ||||
(Once every second) |
Rechargeable Li-ion battery in use, charge the battery | ||||
Battery charging while printer is turned off | |||||
/ | Printer in idle mode | ||||
/ | Receiving data | ||||
- | Received data in buffer | Print data is saved in the buffer. If the printer receives incomplete data (for example because of a lost Wi-Fi connection), printing will not start. Turn the printer off, and then turn it on again. | |||
/ | Printing, or buffer contains unprinted data | ||||
/ | (Once every second) |
Transferring data | |||
/ | Updating a template or program | ||||
/ | Maintenance mode/self printing/cleaning | ||||
/ | Printer in boot mode | To resolve the issue, contact your Brother dealer or Brother Customer Service for assistance. | |||
/ | (Once every two seconds) |
(Once every two seconds) |
Printer cooling down |
The thermal head or motor is too hot. This condition may occur more often when the printer is used at high altitude (more than 10,000 ft (3,048 m)) due to a lower air density available to cool the printer. |
|
(Once every second) |
Communication error No template error Memory full error Access point search error Access point connection error Security error |
||||
Mass storage error | |||||
System error | |||||
- | The POWER indicator does not light | Print data is saved in the buffer. If the printer receives incomplete data (for example because of a lost Wi-Fi connection), printing will not start. Turn the printer off, and then turn it on again. | |||
(Once every three seconds) |
Wi-Fi on, not connected | ||||
Wi-Fi on, connected | |||||
(Once every second) |
WPS setup | ||||
(Once every second) |
(Once every second) |
WPS setup failed | |||
(Once every second) |
Wi-Fi module error |
/ : | When the AC adapter or car adapter is used to power the printer, the indicator is lit in green.
When the rechargeable Li-ion battery is installed to power the printer, the indicator is lit in orange. |
PJ-773
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.