FAQs & Troubleshooting

Close

PJ-763MFi

FAQs & Troubleshooting

FAQs & Troubleshooting

PJ-763MFi

Not your product?

Date: 26/11/2020 ID: faqp00001455_002

How do I clean the platen roller?

Dirt and debris on the platen roller can cause the paper to be fed incorrectly (skewing the print image) and degrade the print quality (distorting the print image).
Follow the procedure below to clean the platen roller:

 

  1. Turn the printer on and make sure no paper is loaded.

  2. Insert the cleaning sheet into the paper input slot.  The text “CLEANING SHEET” should be upright and face the front of the printer, as shown.  The roller will pull the cleaning sheet into the starting position.
    Loading cleaning sheet
  3. Remove the backing paper on the upper half of the cleaning sheet, as shown.
    Removing backing papert

    Do not remove the backing paper from the lower half of the cleaning sheet.


  4. Press the Feed (Feed) button for more than two seconds.  The printer will feed and eject the cleaning sheet.
    • Do not attempt to clean the platen roller with any material other than the cleaning sheet.
    • The cleaning sheet is for cleaning the platen roller only.  Do not use it to clean any other part of the printer.
    • Contact Brother or your Brother dealer for a replacement cleaning sheet.

 

Cleaning the printer's surface

To clean the printer's surface, wipe it with a dry cloth.
Do not use a wet cloth or allow water to enter the printer.
Do not use benzene, alcohol, paint thinner, or cleaners that are abrasive, alkaline, or acidic.  Such cleaners may damage the printer’s surface.

Related Models

PJ-722, PJ-723, PJ-762, PJ-763, PJ-763MFi, PJ-773, PJ-822, PJ-823, PJ-862, PJ-863, PJ-883

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.