PR-1000
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/hf_1000eas.jpg)
PR-1000
Date: 04/12/2018 ID: faqh00100296_002
"Check upper and bobbin thread." message appears on the LCD. What does it mean?
Cause and Solution 1:
The upper thread broke, the thread came out of the thread tension disc or a thread guide, or the machine is not threaded correctly.
Check that the thread passes under the upper and middle thread guides, and correctly thread the upper thread.
For details, see "How do I thread the machine? (Threading the upper thread)".
If the thread is not broken, clean the thread guides and the tension unit.
For details, see "Maintenance (Cleaning the thread paths of the upper threads)".
Cause and Solution 2:
The bobbin thread broke or ran out.
Check the condition of bobbin thread.
If the bobbin thread runs out, replace the bobbin thread.
If the bobbin thread breaks, reinstall the bobbin and bobbin case correctly.
If the bobbin thread is tangled in the hook, remove the thread jammed and clean the hook.
If the bobbin is scratched or damaged, replace the bobbin with a new one.
If the bobbin case is damaged, replace the bobbin case with a new one.
For details, see "How do I restart embroidering when the thread breaks or the bobbin thread runs out while embroidering ?".
Related FAQs
PR-1000, PR1000e
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.