4234D
FAQs & Troubleshooting |
4234D
Date: 17/11/2010 ID: faqh00000507_001
Preparation before threading
Thread tree
- Raise the telescoping thread tree to its highest position.
Make sure that the thread holders are in alignment above the spool pins as illustrated below.
Thread holder on thread tree
Spool pin
Correct position
Thread spool cap
- When using sewing thread spools, the thread spool cap should be used as illustrated below.
Make sure that the spool notch is on the bottom.
Thread spool cap
Thread net
- If you are sewing with loosely spun nylon thread, we recommend that you cover the spool with the net supplied to prevent the thread from slipping off the spool.
Adapt the net to the shape of the spool.
Before threading
- Turn off the main power and light switch for safety.
- Raise the presser foot using presser foot lever.
- Turn the hand wheel so that the mark on the hand wheel <A> is aligned to the line <B> on the machine.
4234D
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.