XL-6040/6050
 |
FAQs & Troubleshooting |
XL-6040/6050
Date: 12/12/2018 ID: faqh00000379_000
When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
Please check the Bobbin Winder.
If the Bobbin Winder shaft is moved to the right position (bobbin winding mode), the needle will not move.
Please return the Bobbin Winder shaft to the left position and press the Start-Stop Button or Foot Control to start the machine in the sewing mode.
AS1430S, BC-2100/BC-2100PRW, BC-2500, BM-3500/2600, BM-3600, CS-8060, CS-8120, DS-120, DS-140, FS155, FS70, GS2700, GS2786K, GS3700, Innov-is 10, Innov-is 1200, Innov-is 1250, Innov-is 15P, Innov-is 30, Innov-is 35P, Innov-is 50, Innov-is 55P, Innov-is 700E, Innov-is 700EII, Innov-is 750E, Innov-is 900, Innov-is 90E, Innov-is 950, Innov-is 955, Innov-is 95E, Innov-is 980K, JA001, JA1400, JA1450NT, JA20, JC14, JK17B, JS1410, JS1700, JV1400, L14, LS-1217, LS-2125/2160, LX27NT, NX-200/200QE, NX-400Q/400, NX-600, PE-150V, PE-300S, PS-53/55/57, PX-100/200/300, STAR 110/130E, STAR 230E/240E, X14s, XL-2120/2220/2230/2240, XL-2600/2620/2630, XL-5010/5020/5030, XL-5050/5060/5070, XL-5130/5232/5340, XL-5600, XL-5700, XL-6040/6050, XT27, XT37
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.