PR655/PR655C
FAQs & Troubleshooting |
PR655/PR655C
Date: 04/03/2009 ID: faqh00000321_000
Why cannot the needle threader be used?
The thread could be jamming due to several reasons.
- Make sure the needle is correctly inserted with the flat side facing the back and pushed up into the machine as far as possible.
- Needle is incorrect. Be sure to use the embroidery needle(s).
- The needle is not at the correct position.
Touch the key to move the desired needle bar to be threaded into embroidering position.
- The hook on the automatic needle-threading mechanism is bent. Consult nearest authorized Dealer or Service Center.
PR-600/600C, PR-620/620C/600II/600IIC, PR-650/650C, PR650e/PR650eC, PR655/PR655C
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.