XL-5130/5232/5340
 |
FAQs & Troubleshooting |
XL-5130/5232/5340
Date: 12/12/2018 ID: faqh00000017_002
How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- Use only the ungummed hook-and-loop fastener which is for sewing. If the glue is attached to the needle or the bobbin hook race, it may cause malfunction.
- If the hook-and-loop is sewn with the thin needle (65/9-75/11), the needle may bend or break.
- Before start sewing, baste together the fabric and the hook-and-loop fastener.
Make sure that the needle passes through the hookand-loop fastener by turning the handwheel and lower the needle into the hook-and-loop fastener before sewing. And then, sew the edge of the hookand-loop fastener at a slow speed.
If the needle does not pass through the hook-andloop fastener, replace the needle with the needle for thick fabrics.
 |
 Edge of the hook-and-loop fastener |
AS1430S, BC-2100/BC-2100PRW, BC-2500, BM-3500/2600, BM-3600, CS-8060, CS-8120, DS-120, DS-140, FS155, FS70, GS2700, GS2786K, GS3700, Innov-is 10, Innov-is 1200, Innov-is 1250, Innov-is 1500D/1500, Innov-is 15P, Innov-is 200/200QE, Innov-is 30, Innov-is 35P, Innov-is 400, Innov-is 4000D/4000, Innov-is 4500, Innov-is 50, Innov-is 55P, Innov-is 600, Innov-is 900, Innov-is 950, Innov-is 955, Innov-is 980K, Innov-is I / Innov-is 6000D, Innov-is Ie, Innov-is V7, JA001, JA1400, JA1450NT, JA20, JC14, JK17B, JS1410, JS1700, JV1400, L14, LS-1217, LS-2125/2160, LX27NT, NX-200/200QE, NX-400Q/400, NX-600, PE-150V, PE-300S, PQ-1500/1500S, PS-53/55/57, PX-100/200/300, QC-1000, QC-2000, STAR 110/130E, STAR 230E/240E, SuperGalaxie 3000/3000C/3000D/3100D, X14s, XL-2120/2220/2230/2240, XL-2600/2620/2630, XL-5010/5020/5030, XL-5050/5060/5070, XL-5130/5232/5340, XL-5600, XL-5700, XL-6040/6050, XT27, XT37
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.