Innov-is NV880E
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/hf_inovnv880eeas.jpg)
Innov-is NV880E
Date: 20/03/2015 ID: faqh00000009_000
Embroidery
-
Problem that occurs most in embroidery is misalignment of pattern.
This is caused mostly because a fabric is loose when it's set into an embroidery frame.
Make sure to set a fabric tightly into an embroidery frame so that you may hear a drum-like sound if you tap the set fabric lightly.
-
Use a stabilizer material when you sew thin fabrics, stretch fabrics or fabrics which easily pucker.
Prepare a stabilizer material that is larger than an embroidery frame to be used.
Make sure to attach right surface of stabilizer material to a fabric securely by using an iron.Fusible side of stabilizer
Fabric(wrong side)
- Use Brother embroidery threads and needle 75/11 for embroidery.
Innov-is 1200, Innov-is 1250, Innov-is 1500D/1500, Innov-is 4000D/4000, Innov-is 4500, Innov-is 700E, Innov-is 700EII, Innov-is 750E, Innov-is 900, Innov-is 90E, Innov-is 950, Innov-is 955, Innov-is 95E, Innov-is 980K, Innov-is BP3600, Innov-is F580, Innov-is I / Innov-is 6000D, Innov-is Ie, Innov-is M330E, Innov-is M370, Innov-is NV180, Innov-is NV18E, Innov-is NV2600, Innov-is NV2700, Innov-is NV800E, Innov-is NV880E, Innov-is V3, Innov-is V3 SE, Innov-is V7, Innov-is XP1, Innov-is XV, PE-150V, PE-300S, PE-DESIGN 10, PE-DESIGN 11, PE-DESIGN 8, PE-DESIGN Lite, PE-DESIGN NEXT, PE-DESIGN PLUS, PE-DESIGN Ver.5, PE-DESIGN Ver.6, PE-DESIGN Ver.7, SuperGalaxie 3000/3000C/3000D/3100D
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.