HL-5240
 |
FAQs & Troubleshooting |
HL-5240
Date: 25/10/2005 ID: faq00000402_001
The printer cannot print full pages of a document. An error message PRINT OVERRUN is printed out.
Please do the following:
-
Press Go to print the remaining data in the printer memory. Cancel the print job, if you want to delete the remaining data in the printer memory.
-
Reduce the complexity of your document or lower the print resolution.
-
Set page protection to AUTO by using the supplied Windows® driver or Remote Printer Console program.
- Change the following settings in the Windows® printer driver, and then try again. The best combination of the settings below will vary depending on your document:
+Graphics mode
+TrueType mode
+Use printer TrueType® fonts
To change these settings, click 'Advanced' tab of the printer driver. Select 'Manual' in the 'Print Setting' section. Click 'Setting...'.
HL-5240, HL-5250DN
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.