HL-1230
 |
FAQs & Troubleshooting |
HL-1230
Date: 24/08/2006 ID: faq00000295_000
Why are all the lights blinking then the drum light blinking?
It indicates Fuser Malfunction.When any of the following error is indicated, turn the printer Off, wait 5 seconds and then turn the printer On again.
If the alarm continues, perform a Factory Reset:
-
Turn the printer off.
-
Hold in the circular button on the front panel of the printer.
-
Turn the printer back on.
-
When the DRUM light is lit by itself let go of the button.
-
Hold in the circular button on the front panel again.
-
Once the Alarm light comes on, let go of the button.
-
This has performed a factory reset on the printer.
If this does not clear the problem, consult your dealer or our authorized service representative.
Related FAQs
HL-1230, HL-1240, HL-1250, HL-1270N, HL-1440, HL-1450, HL-1470N
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.