FAQs & Troubleshooting

Close

Model discontinued. This page is no longer updated.

MFC-8840DN

FAQs & Troubleshooting

FAQs & Troubleshooting

MFC-8840DN

Not your product?

Date: 24/08/2006 ID: faq00000200_004

Can I confirm that the FAX was sent correctly?

You can use the Transmission Vertification Report as confirmation that you sent a fax. This report lists the name or fax number of the receiving party, the time and date of transmission and if the transmission was successful.

 

When the transmission verification report feature is OFF, the report prints automatically if an error occurs during transmission. If the report indicates NG, send the document again. If the report indicates you should check the readability of certain pages, resend those pages.

 

To program the different transmission verification report options, complete the following steps:

 


  1. Press the Menu key.
  2. Press the up or down navigation key until Fax appears on the LCD. Then press Set.
  3. Press the up or down navigation key until Setup Reports or Report Setting appears and press Set.
  4. Press the up or down navigation key until Transmission or XMIT Report appears and press Set.
  5. Press the up or down navigation key until the option you prefer appears:

    • OFF
      Transmission verification report will print only if a fax transmission is unsuccessful.

    • OFF+IMAGE
      Transmission verification report will print only if a fax transmission is unsuccessful with a portion of the fax's first page printed on the report.

    • ON
      Transmission verification report will print after every fax transmission.

    • ON+IMAGE
      Transmission verification report will print after every fax transmission with a portion of the fax's first page printed on the report.

  6. Press Set.
  7. Press Stop/Exit.

You can also make use of the FAX Journal which will list the last 200 incoming and outgoing faxes. To set the report interval, complete the following instructions:

 

  1. Press the Menu key.
  2. Press the up or down navigation key until Fax appears on the LCD. Then press Set.
  3. Press the up or down navigation key until Setup Reports or Report Setting appears, then press Set.
  4. Press the up or down navigation key until Act. Interval or Journal Period appears and then press Set.
  5. Press the up or down navigation key until the interval you wish to use appears. You can set the FAX/ MFC to print activity reports at specific intervals (50 faxes, 6, 12, 24 hours, 2, 7 days or Off). Once the interval appears, press the Set key.

If you choose 7 days, the LCD prompts you to choose a day on which to begin the 7-day countdown. Then, it prompts you to enter the time to begin printing, in 24-hour format. Then, press Set.


  1. Press Stop/Exit.

If you select 6, 12, 24 hours, 2 or 7 days, the machine will print the Activity Report when the FAX/MFC has stored 200 jobs. Even if the time you selected has not passed yet, the FAX/MFC will print the report because the memory is full. All the reported jobs will then be erased from the machine's memory. When the FAX/MFC prints the activity report at any of the intervals you selected, all the reported jobs will be erased from the machine's memory.

Related Models

MFC-8440, MFC-8840D, MFC-8840DN

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit