DCP-T700W
 |
FAQs & Troubleshooting |
DCP-T700W
Date: 26/03/2015 ID: faq00000080_034
What is the recommended paper?
You can use plain paper, inkjet paper (coated paper), glossy paper and envelopes.
We recommended testing various paper types before buying large quantities. For best results, follow the instructions below:
- When you print on inkjet paper (coated paper) and glossy paper, be sure to choose the proper print media in the Basic tab of the printer driver or in the Paper Type setting of the machine's menu.
- When you print on Brother Photo paper, load one extra sheet of the same photo paper in the paper tray. An extra sheet has been included in the paper package for this purpose.
- When using photo paper, remove each sheet at once to prevent smudging or paper jams.
- Avoid touching the printed surface of the paper immediately after printing; the surface may not be completely dry and may stain your fingers.
Paper size supported by the paper trays
| Paper size | |
|---|---|
| paper tray |
Letter, Legal*1, Executive, A4, A5, A6, JIS B5*1,Envelopes (Com-10, DL, C5, Monarch), Photo, Photo 2L, Index Card |
*1: Only available some countries.
Paper weight, thickness and capacity
| Paper Type | Weight | Thickness | No. of sheets |
|---|---|---|---|
| Plain Paper | 17 to 32 lb (64 to 120 g/m2) | 3 to 6 mil (0.08 to 0.15 mm) | 100*1 |
| Inkjet Paper | 17 to 53 lb (64 to 200 g/m2) | 3 to 10 mil (0.08 to 0.25 mm) | 20 |
| Glossy Paper | Up to 58 lb (Up to 220 g/m*2) | Up to 10 mil (Up to 0.25 mm) | 20*2 |
| Photo (4" x 6")/(10 x 15 cm) | Up to 58 lb (Up to 220 g/m2) | Up to 10 mil (Up to 0.25 mm) | 20*2 |
| Index Card | Up to 32 lb (Up to 120 g/m2) | Up to 6 mil (Up to 0.15 mm) | 30 |
| Envelopes | 20 to 25 lb (75 to 95 g/m2) | Up to 20 mil (Up to 0.52 mm) | 10 |
*1: When using plain paper 20 lb (80 g/m2).
*2: BP71 (69 lb (260 g/m2)) paper is especially designed for Brother inkjet machines.
Notes for handling and using print media
- Store paper in its original packaging and keep it sealed. Keep the paper flat and away from moisture, direct sunlight and heat.
- Avoid touching the shiny (coated) side of the photo paper. Load photo paper with the shiny side facing down.
DO NOT use paper
-
Damaged, curled, wrinkled, or irregularly shaped
*1: 0.08 in. (2 mm) or greater curl may cause jams to occur.
- Extremely shiny or highly textured
- Paper that cannot be arranged uniformly when stacked
- Short grain paper
Notes for paper capacity of the output paper tray cover
- Up to 50 sheets of Letter, Legal or A4 20 lb (80 g/m2) paper.
- Photo paper must be picked up from the output paper tray cover one page at a time to avoid smudging.
DCP-T300, DCP-T500W, DCP-T700W, MFC-T800W
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.