Always press on the screen to lock all keys and buttons before changing the presser foot. If is not pressed and the [Start/ Stop] button or another button is pressed, the machine will start and may cause injury.
Always use the correct presser foot for the selected stitch pattern. If the wrong presser foot is used, the needle may strike the presser foot and bend or break, and may cause injury.
Only use presser feet made for this machine. Using other presser feet may lead to accident or injury.
Make sure that the presser foot is installed in the correct direction, otherwise the needle may strike the presser foot, breaking the needle and causing injuries.
Replacing the Presser Foot
Press (Needle position button) to raise the needle.
Press to lock all keys and buttons.
* If the message [OK to automatically lower the presser foot?] appears on the LCD screen, press [OK] to continue.
Raise the presser foot lever.
Press the black button on the presser foot holder and remove the presser foot.
(1) Black button
(2) Presser foot holder
Place the new presser foot under the holder, aligning the foot pin with the notch in the holder. Lower the presser foot lever so that the presser foot pin snaps into the notch in the holder.
(1) Notch
(2) Pin
Raise the presser foot lever to check that the presser foot is securely attached.
Press to unlock all keys and buttons.
If your question was not answered, have you checked other FAQs?
(Needle position button) to raise the needle.
to lock all keys and buttons.
