ADS-1250W

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 05/11/2020
  • ID: faq00100029_012

Enable the Brother machine's network interface.

Follow the steps below to enable or disable the Brother machine's network interface.

 

NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.

 

  1. Open the Top Cover (1) and the Front Cover (2).
    Open the Top Cover and the Front Cover
  2. Press and hold Scan to PC(Scan to PC) for five seconds.
    After press key five seconds, all LEDs would light one second to notify user command has triggered.
  3. Close the Front Cover.
    Wi-Fi Indicator (with LED) indicates the wireless network is enable or disable.

(For wireless network users)
If you want to set up your Brother machine on a wireless network, see the following FAQ.
> Click here to see how to set up your Brother machine on a wireless network.

If your Brother machine still having an issue over the network feature, see the Related FAQs at the end of the page.

 

Related FAQs

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

ADS-1250W

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit