HL-4150CDN

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 07/06/2010
  • ID: faq00002541_003

Clean the paper pick-up roller

DO NOT use cleaning materials that contain ammonia, alcohol, any type of spray, or any type of flammable substance to clean the outside or inside of the machine. Doing this may cause a fire or electrical shock.

image





Follow the steps below to clean the paper pick-up roller.

  1. Turn off the machine's power switch. Disconnect all interface cables, and then unplug the AC power cord.

  2. Pull the paper tray completely out of the machine.

  3. Tightly wring out a lint-free cloth soaked in lukewarm water, and then wipe the separator pad(1) of the paper tray with it to remove dust.

    image


  4. Wipe the two pick-up rollers(1) inside of the machine to remove dust.


    image


  5. Put the paper tray back in the machine.

  6. Connect interface cables and then plug the machine back in. Turn on the power switch.



 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-4150CDN, HL-4570CDW, HL-4570CDWT

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit