MFC-L8905CDW

FAQs & Troubleshooting

FAQs & Troubleshooting

Paper is Jammed underneath the Paper Tray

If the machine's control panel or the Status Monitor indicates that there is a jam in the paper tray, follow these steps:

  1. Leave the machine turned on for 10 minutes for the internal fan to cool the extremely hot parts inside the machine.
  2. Pull the paper tray completely out of the machine.
    image
  3. Make sure the jammed paper does not remain inside the machine.
    image
  4. If paper is not jammed inside the machine, remove the paper from the paper tray, flip it over, and check underneath the paper tray.
    image
  5. If the paper is not jammed in the paper tray, open the back cover.
    image
    WARNING
    HOT SURFACE

    The machine's internal parts will be extremely hot. Wait for the machine to cool down before touching them.

    image
  6. Use both hands to gently pull the jammed paper out of the back of the machine.
    image
  7. Close the back cover until it locks in the closed position.
  8. Put the paper tray firmly back in the machine.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

MFC-L8610CDW, MFC-L8895CDW, MFC-L8900CDW, MFC-L8905CDW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.