Model discontinued. This page is no longer updated.

HL-4200CN

FAQs & Troubleshooting

FAQs & Troubleshooting

How do I replace the transfer roll cartridge?


Follow the procedure below to replace the transfer roll cartridge.

  1. Push up button A (1) and fully open the front cover (2).

  2. Grip the orange tabs at both ends of the transfer roll (1) and gently lift it out of the printer (2).Lift the transfer roll carefully to prevent waste toner from spilling out.

  3. Lift the transfer roll cartridge carefully to prevent transfer roll from spilling out.

  4. Unpack a new transfer roll cartridge and grip the orange tabs as shown.

  5. Insert the pins at both ends of the transfer roll cartridge into the bearings inside the printer, and gently push the roll into the printer.

  6. To lock the transfer roll cartridge into the printer, push down on the tabs until you hear a click.

  7. Close the front cover.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-4000CN, HL-4200CN

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.