CM300
FAQ 및 문제 해결 |
"Cannot operate when there are too many patterns."
message appearing on the LCD. What does it mean?
The message appears under the following conditions.
Cause | Solution |
There are 301 or more patterns being cut in the “Direct Cut” mode. | Reduce the number of patterns being used. |
There are 301 or more patterns being saved as cutting data in the “Scan to Cut Data” mode. | |
There are too many cutting lines to be created after large number of small patterns are scanned. | Scan images again after reducing the number of patterns arranged in the original. |
There are too many light tone patterns to be converted to two-tone (black and white) patterns while the image detection level is being adjusted. |
Perform the necessary operation according to the instructions or the solution described.
If the problem persists, contact the retailer who sold you this machine or the nearest authorized service center.
내용 피드백
지원을 개선하는 데 도움이 되도록 아래에 피드백을 제공하십시오.