HL-5250DN
 |
GYIK és hibaelhárítás |
The printer cannot print full pages of a document. An error message PRINT OVERRUN is printed out.
Please do the following:
-
Press Go to print the remaining data in the printer memory. Cancel the print job, if you want to delete the remaining data in the printer memory.
-
Reduce the complexity of your document or lower the print resolution.
-
Set page protection to AUTO by using the supplied Windows® driver or Remote Printer Console program.
- Change the following settings in the Windows® printer driver, and then try again. The best combination of the settings below will vary depending on your document:
+Graphics mode
+TrueType mode
+Use printer TrueType® fonts
To change these settings, click 'Advanced' tab of the printer driver. Select 'Manual' in the 'Print Setting' section. Click 'Setting...'.
Tartalommal kapcsolatos visszajelzés
Kérjük, segítse munkánkat azzal, hogy visszajelzést küld.
