DCP-1610W

常見問題&故障排除

常見問題&故障排除

Replace Drum

The Brother machine has separate consumables the toner cartridge and the drum unit. Verify you replace only the drum unit and not the toner cartridge.

> Click here to see information for the difference between the toner cartridge and the drum unit.

 

Follow the steps below to clear the Replace Drum message.

 

Replacing the drum unit

  1. Keep the machine powered ON.
  2. Open the scanner cover. The pull-arm (1) on the left side of the machine will lock. Open the top cover.

    CoverOpen
  3. Slowly take out the drum unit and toner cartridge assembly.

    TakeOutDrum
  4. Push down the lock lever (1) and take the toner cartridge out of the drum unit (2).

    TakeOutToner
  5. Unpack the new drum unit and put the toner cartridge firmly into the new drum unit until you hear it lock into place. If you put the cartridge in correctly, the lock lever on the drum unit will lift automatically.

    PutToner
  6. Put the drum unit and toner cartridge assembly back into the machine. Close the top cover.

    PutDrum
  7. After pulling the pull-arm (2) on the left side of the machine down, close the scanner cover.

    CloseCover

Reset the drum counter

  1. Press Menu.
  2. Press the Up or Down arrow key to choose Machine Info.. Press OK.
  3. Press the Up or Down arrow key to choose Reset Drum. Press OK for 3 seconds.
  4. Press the Up arrow key to reset the drum unit counter.
  5. Press Stop/Exit.

你已經查看過使用說明書了嗎?

如果您需要進一步的協助, 請聯絡Brother客戶服務:

內容意見回饋

請於下方回饋您的意見以幫助我們提升服務的品質

步驟一: 此頁面的資訊對您有幫助嗎

步驟二: 你有任何其他想要提出的意見嗎?

請注意, 此表格僅用做意見回饋使用