SDX125i

FAQs & Troubleshooting

FAQs & Troubleshooting

"Patterns cannot be welded. There are some patterns which cannot accept or no overlaps." message appearing on the LCD. What does it mean?

The message appears when you are welding patterns.
 

  • The patterns do not overlap. Rearrange them so the selected patterns overlap. Unifying the pattern, instead, can be an alternative editing method depending on your project.
     
  • A pattern that has a seam allowance is selected. Deactivate the seam allowance setting and weld the patterns.
     
  • An open shape is selected as a pattern. Only closed shapes can be welded. Unifying the pattern, instead, can be an alternative editing method depending on your project.

 

Perform the necessary operation according to the instructions or the solution described.
If the problem persists, contact the Brother customer service or the nearest authorized service center.

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

CM100DM, CM350, CM550DX/ CM550, CM650W, SDX125, SDX125e, SDX125i, SDX225, SDX325, SDX85

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.