Innov-is NV2700
|
Veelgestelde vragen en probleemoplossing |
How do I attach or remove the embroidery frame ?
Wind and insert the bobbin before attaching the embroidery frame.
Attaching the Embroidery Frame
-
Press the (Presser Foot Lifter button) to raise the presser foot.
-
Raise the frame-securing lever.
|
(1) Frame-securing lever
(2) Carriage |
-
Align the embroidery frame guide with the right edge of the embroidery frame holder.
|
(1) Embroidery frame holder
(2) Embroidery frame guide |
-
Slide the embroidery frame into the holder, making sure to align the embroidery frame’s arrow mark with the one on holder.
|
(1) Arrow mark |
-
Lower the frame-securing lever to be level with the frame to secure the embroidery frame in the embroidery frame holder.
If the frame-securing lever is not lowered, the following message appears.
You cannot start sewing until you lower the frame-securing lever.
Removing the Embroidery Frame
-
Press the (Presser Foot Lifter button) to raise the presser foot.
-
Raise the frame-securing lever.
-
Pull the embroidery frame toward you.
Staat het antwoord op uw vraag er niet bij, kijkt u dan eerst bij de andere vragen:
Heeft u de beschikbare handleidingen bekeken?
Heeft u meer hulp nodig, dan kunt u contact opnemen met de Brother-klantenservice.
Feedback
Geef hieronder uw feedback. Aan de hand daarvan kunnen wij onze ondersteuning verder verbeteren.