Innov-is M380D

Veelgestelde vragen en probleemoplossing

Veelgestelde vragen en probleemoplossing
  • Datum: 21/07/2017
  • Nummer: faqh00000639_003

How do I attach or remove the embroidery frame ?


Attaching the Embroidery Frame

Wind and insert the bobbin before attaching the embroidery frame making sure to use the recommended bobbin thread. Check that there is enough thread in the bobbin.

 

  1. Raise the presser foot lever to raise the presser foot.


     
  2. Pass the embroidery frame under the presser foot.
    If necessary, raise the presser foot lever even further.

    img01


     
  3. Firmly insert the embroidery frame guide into the embroidery carriage frame holder from the top.
    Line up the embroidery frame guide tabs and the embroidery carriage frame holder slots and push in until it clicks and stops.
    img02 (1) Embroidery frame guide tabs
    (2) Embroidery carriage frame 
          holder slots
    >> The embroidery unit is attached.

    Correctly set the embroidery frame into the embroidery frame holder. Otherwise, the presser foot may hit the embroidery frame, resulting in injury.



     

Removing the embroidery frame

 

  1. Raise the presser foot lever to raise the presser foot.


     
  2. Press the part of the embroidery frame holder in the figure to the left side, and raise the embroidery frame.
    img03 (1) Lever

    >> The embroidery frame will separate from the embroidery frame holder.


     
  3. Remove the embroidery frame under the presser foot while raising the presser foot lever even further.

    img04

    Do not hit the needle with your finger or the embroidery frame. It may cause injury or needle breakage.


     

 

Staat het antwoord op uw vraag er niet bij, kijkt u dan eerst bij de andere vragen:

Heeft u de beschikbare handleidingen bekeken?

Heeft u meer hulp nodig, dan kunt u contact opnemen met de Brother-klantenservice.

Feedback

Geef hieronder uw feedback. Aan de hand daarvan kunnen wij onze ondersteuning verder verbeteren.

Stap 1: is de informatie op deze pagina nuttig voor u?

Stap 2: wilt u nog iets toevoegen?

Dit formulier is alleen bedoeld voor feedback.

Verzenden