Innov-is NV880E
FAQ et Diagnostic |
How do I attach or remove the embroidery frame ?
Wind and insert the bobbin before attaching the embroidery frame.
Attaching the Embroidery Frame
-
Press the (Presser Foot Lifter button) to raise the presser foot.
-
Raise the frame-securing lever.
(1) Frame-securing lever (2) Carriage
-
Align the embroidery frame guide with the right edge of the embroidery frame holder.
(1) Embroidery frame holder (2) Embroidery frame guide
-
Slide the embroidery frame into the holder, making sure to align the embroidery frame’s arrow mark with the one on holder.
(1) Arrow mark -
Lower the frame-securing lever to be level with the frame to secure the embroidery frame in the embroidery frame holder.
If the frame-securing lever is not lowered, the following message appears.
You cannot start sewing until you lower the frame-securing lever.
Removing the Embroidery Frame
-
Press the (Presser Foot Lifter button) to raise the presser foot.
-
Raise the frame-securing lever.
-
Pull the embroidery frame toward you.
Si vous n'avez pas obtenu de réponse satisfaisante à votre question, avez-vous vérifié d'autres FAQ?
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.