Innov-is NV2600
![FAQ et Diagnostic FAQ et Diagnostic](/g/b/shared/img/module/icon_question_33.png) |
FAQ et Diagnostic |
How do I attach or remove the embroidery frame ?
Wind and insert the bobbin before attaching the embroidery frame.
Attaching the Embroidery Frame
-
Press the
(Presser Foot Lifter button) to raise the presser foot.
-
Raise the frame-securing lever.
![image](/g/b/img/faqend/faqh00000639_001/eu_ot/en/1005666/faqh639_fig1002.gif) |
(1) Frame-securing lever
(2) Carriage |
-
Align the embroidery frame guide with the right edge of the embroidery frame holder.
![image](/g/b/img/faqend/faqh00000639_001/eu_ot/en/1005667/faqh639_fig1003.gif) |
(1) Embroidery frame holder
(2) Embroidery frame guide |
-
Slide the embroidery frame into the holder, making sure to align the embroidery frame’s arrow mark with the one on holder.
![image](/g/b/img/faqend/faqh00000639_001/eu_ot/en/1005668/faqh639_fig1004.gif) |
(1) Arrow mark |
-
Lower the frame-securing lever to be level with the frame to secure the embroidery frame in the embroidery frame holder.
![image](/g/b/img/faqend/faqh00000639_001/eu_ot/en/1005669/faqh639_fig1005.gif)
If the frame-securing lever is not lowered, the following message appears.
You cannot start sewing until you lower the frame-securing lever.
![image](/g/b/img/faqend/faqh00000639_001/eu_ot/en/1005670/faqh639_fig1001.gif)
Removing the Embroidery Frame
-
Press the
(Presser Foot Lifter button) to raise the presser foot.
-
Raise the frame-securing lever.
-
Pull the embroidery frame toward you.
![image](/g/b/img/faqend/faqh00000639_001/eu_ot/en/1005673/faqh639_fig1007.gif)
Si vous n'avez pas obtenu de réponse satisfaisante à votre question, avez-vous vérifié d'autres FAQ?
Avez-vous consulté les manuels?
Pour toute assistance supplémentaire, contactez le service clientèle de Brother:
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.