FAQs & Troubleshooting
Popular |
56 Results
- 1Basic operations and embroidery functions [Video instructions]
- 2Touch panel is malfunctioning.
- 3How do I wind the bobbin?
- 4How do I adjust the sensitivity of the operation keys?
- 5How do I thread the machine (Threading the upper thread)?
- 6How do I adjust thread tension for embroidering?
- 7How do I remove or attach the Embroidery foot ?
- 8How do I hoop the fabric in the embroidery frame?
- 9How to use the memory function to save embroidery patterns
- 10How do I clean the race?
- 11How do I retrieve embroidery patterns saved in the machine's memory or a USB flash drive?
- 12How do I attach or remove the embroidery frame ?
- 13How do I set the bobbin?
- 14Upper thread breaks.
- 15How do I change the needle ?
- 16Tips for getting better embroidery results
- 17How do I restart embroidering if the thread breaks or the bobbin runs out of thread during embroidering?
- 18Embroidery
- 19How to change the needle stop position
- 20Fabric puckers
- 21It is difficult to remove the needle plate cover from the machine. (How do I remove the needle plate cover from the machine?)
- 22Where do I put the oil in my machine?
- 23Stitches are skipped
- 24Embroidery Data Precautions (About the types of embroidery data that can be used.)
- 25"F05" appears on the LCD. What does it mean?
- 26Bobbin thread breaks
- 27"Not enough available memory to save." message appears on the LCD. What does it mean?
- 28How do I attach or remove the Embroidery Unit?
- 29"Preventive maintenance is recommended." message appears on the LCD. What does it mean?
- 30"F04" appears on the LCD. What does it mean?
- 31"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 32"Lower the presser foot lever." message appears on the LCD. What does it mean?
- 33Needle breaks.
- 34"F07" appears on the LCD. What does it mean?
- 35"F03" appears on the LCD. What does it mean?
- 36"F02" appears on the LCD. What does it mean?
- 37"F01" appears on the LCD. What does it mean?
- 38When the thread became tangled under the bobbin winder seat
- 39"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
- 40"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 41"F06" appears on the LCD. What does it mean?
- 42"Cannot recognize the data for the selected pattern. The data may be corrupted. Please turn off the power and turn on again." message appears on the LCD. What does it mean?
- 43"Pattern extends to the outside of embroidery frame. This function cannot be used at this time." message appears on the LCD. What does it mean?
- 44"Pattern extends to the outside of embroidery frame. Add no additional characters." message appears on the LCD. What does it mean?
- 45"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?
- 46"USB media error" message appears on the LCD. What does it mean?
- 47"This USB media cannot be used." message appears on the LCD. What does it mean?
- 48"Not enough available memory to save the pattern. Delete another pattern?." message appears on the LCD. What does it mean?
- 49"This pattern cannot be used." message appears on the LCD. What does it mean?
- 50"Cannot change the font since some letters are not included to the selected font." message appears on the LCD. What does it mean?