FAQs & Troubleshooting
![]() |
Popular |
101 Results
- 1The embroidery design data cannot be transferred from PE-DESIGN 11 to the embroidery machine via the wireless network.
- 2The embroidery design cannot be imported to the design page on PE-DESIGN 11 from the embroidery machine via the wireless network.
- 3How do I adjust thread tension for embroidering?
- 4The wireless network connection cannot be set up between the embroidery machine and the computer with PE-DESIGN 11.
- 5How do I change the needle ?
- 6How do I hoop the fabric in the embroidery frame?
- 7It is difficult to remove the needle plate cover from the machine. (How do I remove the needle plate cover from the machine?)
- 8How do I attach or remove the embroidery frame ?
- 9How do I set the bobbin?
- 10[Embroidery machine users] How to retrieve the data transferred from Artspira
- 11How do I wind the bobbin?
- 12Tutorial videos on how to use the machine [Video instructions]
- 13"This pattern cannot be used." message appears on the LCD. What does it mean?
- 14About the contents and data treated by Artspira app
- 15M4341001 appears on the Artspira app screen.
- 16M3124301 appears on the Artspira app screen.
- 17M1332002 appears on the Artspira app screen.
- 18Fabric puckers
- 19Tips for getting better embroidery results
- 20Touch panel is malfunctioning.
- 21Where do I put the oil in my machine?
- 22Embroidery
- 23"The machine is still trying to connect to your wireless network." message appears on the LCD. What does it mean?
- 24M5613201 appears on the Artspira app screen.
- 25The pattern transferred from the Artspira app does not appear on the screen of the machine
- 26How to link accounts
- 27M4452001 appears on the Artspira app screen.
- 28"The authentication and encryption methods used by the selected wireless LAN access point/router are not supported by your machine." message appears on the LCD. What does it mean?
- 29"The wireless LAN access point/router cannot be detected. " message appears on the LCD. What does it mean?
- 30Stitches are skipped
- 31"F03" appears on the LCD. What does it mean?
- 32How do I restart embroidering if the thread breaks or the bobbin runs out of thread during embroidering?
- 33How do I adjust the sensitivity of the operation keys?
- 34"The bobbin thread is almost empty." message appears on the LCD during embroidering and the machine has stopped. What does it mean?
- 35"Preventive maintenance is recommended." ppears on the LCD.
- 36After selecting data, "Downloading" is displayed and the screen does not change to the next screen
- 37How to disconnect a machine from Artspira using the machine
- 38How to connect your machine and transfer data to Artspira
- 39M2102501 appears on the Artspira app screen.
- 40How do I remove or attach the Embroidery foot ?
- 41How do I thread the machine (Threading the upper thread)?
- 42"Lower the presser foot lever." message appears on the LCD. What does it mean?
- 43"USB media error" message appears on the LCD. What does it mean?
- 44"This USB media cannot be used." message appears on the LCD. What does it mean?
- 45"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 46Data cannot be saved to a USB flash drive
- 47Data cannot be saved to the machine
- 48Multiple data cannot be transferred to the machine at once
- 49Data cannot be transferred even though the machine number has been input. (M5622201)
- 50There is no machine that can be transferred