FAQs & Troubleshooting
Popular |
328 Results
- 1About Blade Extension, Cutting Pressure and Mat
- 2Mat and Cutting Blade Combinations
- 3Cut a thin fabric for the quilt piece. (How to use the High Tack Adhesive Fabric Support Sheet.)
- 4The material to be cut/drawn or original to be scanned peels off during cutting/scanning.
- 5How To Change the Registered Machine Number That Imports The Optional Pattern Collection (Ex. Disney Pattern and Calligraphy Pattern/Font)
- 6Can I create the cutting data for ScanNCut from the image data?
- 7List of Error Messages for CanvasWorkspace (E##### / N#####)
- 8Downloading Optional Design Pattern Collection
- 9List of Error Messages for CanvasWorkspace (Others)
- 10The mat or the material catches on a feed roller during cutting/drawing.
- 11Can I create the cutting data for ScanNCut from vector graphics data?
- 12Mat and Material Combinations
- 13How to Install and Uninstall the Holder
- 14The mat is fed in at an angle and is not fed during cutting / drawing.
- 15What should I do if the scanned and cut positions are misaligned?
- 16E11010 appears on the computer screen.
- 17ErrS07 appears on the computer screen.
- 18E10004 appears on the computer screen.
- 19The Calligraphy Font in the USB Flash Drive is Not Displayed
- 20Adjusting the Blade Extension
- 21What type of data can my ScanNCut machine be used?
- 22FC1 files on USB flash drives of optional patterns cannot be imported into CanvasWorkspace.
- 23ErrS90 appears on the computer screen.
- 24ErrS51 appears on the computer screen.
- 25ErrS25 appears on the computer screen.
- 26E11006 appears on the computer screen.
- 27How to register Your Machine with CanvasWorkspace
- 28Support OS Information about ScanNCut Link Plug-in for Adobe® Illustrator®
- 29ErrS99 appears on the computer screen.
- 30ErrS52 appears on the computer screen.
- 31The Pattern for Paper Piercing or The Paper Piercing Menu Is Not Displayed.
- 32What type of cut files and projects containing cut data other than built-in patterns are available?
- 33N10004 appears on the computer screen.
- 34Cutting/Drawing by Tracing an Image
- 35How to trace the inside edge of the image on Enhanced Image Tracing function. [Video]
- 36Replacing the Blade
- 37Replacement Criteria
- 38If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
- 39What should I do if the adjustment of the scanning and cutting positions failed?
- 40List of Error Messages for CanvasWorkspace (ErrSxx / NoteSxx)
- 41ErrS24 appears on the computer screen.
- 42ErrS06 appears on the computer screen.
- 43ErrS01 appears on the computer screen.
- 44E99901 appears on the computer screen.
- 45E02005 appears on the computer screen.
- 46What is the Difference between "Pen Holder", "Universal Pen Holder" and "Small Barrel Pen Holder"?
- 47What should I do if I change the size (enlarge/reduce) of the Disney Pattern downloaded?
- 48How to Use the Printable Sticker Function on CanvasWorkspace for PC [Video]
- 49N11001 appears on the computer screen.
- 50E12002 appears on the computer screen.