FAQs & Troubleshooting
![]() |
Popular |
300 Results
- 1Mat and Material Combinations
- 2About Blade Extension, Cutting Pressure and Mat
- 3Mat and Cutting Blade Combinations
- 4Downloading Optional Design Pattern Collection
- 5Adjusting the Blade Extension
- 6Can I create the cutting data for ScanNCut from the image data?
- 7Preparation of Craft Paper / Fabric
- 8List of Error Messages for CanvasWorkspace (Others)
- 9What type of data can my ScanNCut machine be used?
- 10The mat is fed in at an angle and is not fed during cutting / drawing.
- 11The mat or the material catches on a feed roller during cutting/drawing.
- 12Can I create the cutting data for ScanNCut from vector graphics data?
- 13List of Error Messages for CanvasWorkspace (ErrSxx / NoteSxx)
- 14List of Error Messages for CanvasWorkspace (Exxxxx / Nxxxxx)
- 15Cut a thin fabric for the quilt piece. (How to use the High Tack Adhesive Fabric Support Sheet.)
- 16How do I Scan for Cutting (Direct Cut) ?
- 17Support OS Information about ScanNCut Link Plug-in for Adobe® Illustrator®
- 18Cutting/Drawing by Tracing an Image
- 19The material to be cut/drawn or original to be scanned peels off during cutting/scanning.
- 20How To Change the Registered Machine Number That Imports The Optional Pattern Collection (Ex. Disney Pattern and Calligraphy Pattern/Font)
- 21ErrS52 appears on the computer screen.
- 22ErrS09 appears on the computer screen.
- 23If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
- 24Cut the fabric other than quilt pieces. (How to use the Iron-On Fabric Appliqué Contact Sheet.)
- 25What should I do if the scanned and cut positions are misaligned?
- 26The Pattern for Paper Piercing or The Paper Piercing Menu Is Not Displayed.
- 27Can different types of material be attached to the same mat for cutting?
- 28E00003 appears on the computer screen.
- 29How long will the mat last?
- 30Scanning a Background Image (Background Scanning).
- 31Replacement Criteria
- 32Attaching & Peeling Off the Material
- 33What should I do if I change the size (enlarge/reduce) of the Disney Pattern downloaded?
- 34FC1 files on USB flash drives of optional patterns cannot be imported into CanvasWorkspace.
- 35Replacing the Blade
- 36ErrS99 appears on the computer screen.
- 37ErrS90 appears on the computer screen.
- 38ErrS23 appears on the computer screen.
- 39What type of cut files and projects containing cut data other than built-in patterns are available?
- 40Can rough material be cut?
- 41How to Use the Printable Sticker Function on CanvasWorkspace for PC [Video]
- 42E94005 appears on the computer screen.
- 43E10004 appears on the computer screen.
- 44The machine is turned off (Auto Shut Down).
- 45How to Calibrate the LCD Touchscreen Display
- 46How do I Create the Cutting Data (Scan to Cut Data) ?
- 47Care and Maintenance (Cleaning the Holder)
- 48Settings for Specific Functions
- 49E11010 appears on the computer screen.
- 50ErrS10 appears on the computer screen.